xyz資訊工坊

xyz 軟體補給站

  商品編號: DVDXX16687
  商品名稱: FARO Technologies BuildIT Construction 2018.5 SP2 首個全面集成的建築生命週期質量保證(QA)和質量控制(QC)管理工具
  語系版本:
  運行平台:
  更新日期:
  光碟片數: 1片
  銷售價格: $100元
  熱門標籤:
您可能感興趣:
您可能也喜歡:
DVDXX16887--JixiPix Artista Impresso Pro 1.8.10 x86/x64 印象派油畫風格特效軟件
DVDXX16888--JixiPix Hand Tint Pro 1.0.10 x86/x64 一款功能強大的圖像調色工具
DVDXX16895--NI SystemLink 19.5 為測試和測量系統提供軟件部署、系統配置、試監視及數據管理工具
DVDXX16912--ThunderSoft Flash to HTML5 Converter 3.5.0.0 一個專業的Flash轉換器,用於SWF文件到html5視頻的轉換
DVDXX16937--VideoReDo TVSuite 6.60.4.806 視頻編輯工具
FARO Technologies BuildIT Construction 2018.5 SP2 首個全面集成的建築生命週期質量保證(QA)和質量控制(QC)管理工具
BuildIT Construction是首個全面集成的建築生命週期質量保證(QA)和質量控制(QC)管理工具,使施工專業人員能使用三維掃瞄數據,通過實時比較 CAD 設計圖實現對項目的持續性監控。

除了進行地板平整度、水平度和牆體垂直度等方面的測量以外,BuildIT Construction 還可以對照原始設計文件或建築信息模型(BIM)文檔,對地板、鋼樑、牆體、柱子、門窗的竣工位置變化進行精確的比較。這確保了實際建築是按照正確的規格建造的,從而使施工專業人員可以在項目生命週期的各個階段檢測錯誤,以減少昂貴的廢料和返工。

將FARO Focus Laser Scanner, Laser Tracker以及TracerM 投影儀和BuildIT Construction進行集成,以在施工項目中避免返工、減少廢料。通過避免返工可以降低約50% 的建築成本。在整個建築過程中不斷進行精確的全面測量,並立即發現不符之處。由於最大限度地減少了錯誤,返工費用也隨之降低,因此這種早期檢測使建築師和承包商能在建造更高質量項目的同時,節省時間和金錢。

驗證設計模型——確保按照設計規格來建造建築物
• 對照設計模型驗證已竣工掃瞄數據的精確性
• 對照任何建模對象執行表面分析
• 確保遵守BIM
—識別已構築的部件或組件
—檢測未正確放置或缺失的結構如牆體、柱子、橫樑、管道等

公差評估——保持項目進度,同時減少廢料、縮短工期並節省資源
• 準確快速地進行重要檢查
— 根據ASTM E1155標準檢查地板的平整度和水平度,並附上報告和地形曲線
— 無論是否具備原始設計模型,都能進行牆體的垂直度和平整度檢查
— 通過檢測牆體、去除殘渣和鋼筋來準確有效地計算切割與填充的體積
— 測量已構築物體的變形(如:梁拱高度、牆體和地板平整度、裂縫等)
— 根據掃瞄數據計算儲罐的填充量並自動創建報告

位置與監控——建立責任記錄文件、降低風險和優質的預製
• 進行4D雲對雲比較
— 在施工期間監控相鄰的建築物
— 評估現場變形程度從而測量隨著時間推移而發生的移動或沉降
• 可以連接激光投影儀:
— 投映預製部件和組件的設計模版
— 投映工廠佈局和規劃的設備放置方案
— 測量平整度並將結果投影至表面
• 使用激光跟蹤儀或全站儀來實時定位結構要素和預製部件

數據導入——直接導入設計文件加快流程
• 可以從不同激光掃瞄儀製造商和CAD平台導入各種類型的掃瞄數據,例如:fls、fws、lsproj、e57、txt、asc、csv、pts、ref、xyz
• 導入後,可以使用SCENE的配准API來配准數據。進行現場質量控制並加快檢測過程
• 用行業標準格式導入設計文件,例如:dwg、dxf、rvt、ifc、sat、iges、Parasolid、Step

FARO Technologies BuildIT Construction 2018.5 SP2 | 
FARO, the world's most trusted source for 3D measurement and imaging solutions for factory metrology and construction BIM/CIM applications, announces the release of BuildIT Construction 2018.5 SP2 a comprehensive verification software solution that enables confident management of all quality assurance and quality control processes throughout the building and facility lifecycle.

BuildIT Construction is the first fully integrated building lifecycle Quality Assurance (QA) and Quality Control (QC) management tool empowering construction professionals to continuously monitor projects with real time comparisons against CAD designs using 3D scan data. In addition to measuring aspects such as floor flatness, levelness and wall plumbness, BuildIT Construction enables accurate comparisons to the original design files or Building Information Model (BIM) documentation, tank deformation analysis, including as-built positional changes to floors, steel beams, walls, columns, windows and doors. This ensures that the actual building is being constructed to the correct specifications and as a result allows construction professionals to detect errors at every stage of the project lifecycle and reduce expensive scrap and rework.

Integrate FARO Focus Laser Scanners, Laser Trackers and Tracer Laser Projectors with BuildIT Construction to avoid rework and reduce scrap in your construction projects. By avoiding rework, building costs can be reduced by approximately 50%. Perform accurate full measurements continuously throughout the build process and immediately find discrepancies. Such early detection enables architects and contractors to produce higher quality projects while saving time and money since errors are minimized and rework cost is subsequently reduced.

BuildIT Construction Webinar

BuildIT Software & Solutions Ltd. develops and distributes custom and off-the-shelf 3D software solutions that interface with measurement devices for real-time part inspection, tool building, assembly, alignment, measurement process automation, meshing and quality control in advanced manufacturing. Located in Montreal, Quebec, BuildIT has gained the trust and partnership of many of the world’s largest civil and defense contractors and has been instrumental in global programs such as the JSF F-35. BuildIT is a division of FARO Technologies Canada, Inc.

Product: FARO Technologies BuildIT Construction
Version: 2018.5 SP2
Supported Architectures: x64
Website Home Page : http://www.faro.com
Language: english
System Requirements: PC *
Supported Operating Systems: *